Beaumont, CA Copper-PEX Repipe and Slab Leak Repairs

A Repipe is a process where the old water pipes in your house or a building are replaced with new ones. All pipe fittings, stop valves and supply lines are replaced. this generally produces considerably better water pressure and even better quality water.

Should I Repipe our house in Beaumont?

There are many reasons for why you needs to replace the piping in your home.

For residences with galvanized water pipes:

Galvanized piping are located in homes constructed during the 1980’s. A galvanized pipe is an iron water line which is coated with zinc to be protected from corrosion. Regretfully the zinc coating eventually deteriorates over the years exposing the iron material, accompanied by oxidation buildup.

Common Slab Leak Conditions:

Lower Water Pressure – The reason could possibly be the reduction of the water flow due to rust and corrosion buildup in the galvanized pipe.

Rusty Water – Corrosion typically finds it’s way to the water fixtures. This means an advanced stage of oxidation in your piping.

Leaking Pipes – Leaks are most commonly resulting from corrosion of the galvanized iron pipes. Concealed leaks may develop in the walls, inside the attic as well as beneath the house, creating the chances of considerable damage to the home.

For residences with polybutylene water pipes:

This form of plastic pipe was commonly used from the mid 70’s to the early 90’s. At the time it was viewed as the next technological improvement for piping and fixtures. Polybutylene piping systems turned out to be installed in millions of people’s homes before it was listed as highly faulty. Nearly 60% of most homes constructed in this timeframe is still equipped with this kind of of water pipe in the house.

Polybutylene water pipes have a very small life span, considering the fact that chemical compounds in regular city-provided water makes it firm up and turn into brittle. The fittings generally burst open first, and afterwards the pipe itself.

Polybutylene plumbing systems consist of flexible plastic pipe, colored grey when for indoor use and blue or black for outdoor usage. A number of fittings are made with both plastic and metal. Insert fittings are used to join pieces of polybutylene pipe.

For homes with copper plumbing situated in the slab.

Slab leaks are caused by copper or any other piping becoming corroded from certain soil and water conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water is leaking through the foundation.
  • Water is running even when the faucets are turned off.
  • Your water meter displays your water is running whether or not your water is off.
  • Abnormally significant monthly water costs.
  • Next door neighbors have had a slab leak.
  • You have experienced a slab leak before.

Great things about Copper or PEX Repiping

  • Heightened water pressure
  • You can forget rusty or foul tasting water
  • Really clean, clear water
  • Being able to turn on several faucets simultaneously
  • Superior quality water pipes without any more leaky water lines.
  • No scalding skin while in the shower if someone else turns on a faucet or flushes.
  • Greater relief when your piping system is dependable.
  • Beneficial selling point for your property.

When you hire a plumbing service or other firm to complete the task, it’s most likely going to cost you more over time if you consider that you are going to have to employ a drywall repair service business to patch over the many repair points. When you hire a repipe company that has a master patcher on staff such as Repipe Specialists, you will never be required to spend extra money or time in getting your home back to original condition. From beginning to end, the PEX and Copper repipe procedure will take only 2 or 3 days.