Burlingame Copper Repipe and Slab Leak Repairs
A Copper or PEX Repipe is the course of action where your existing water lines in your house or a building are replaced with brand new ones. All pipe fittings, supply lines and water valves are replaced. this generally results in stronger water pressure and considerably better quality water.
Should I Repipe the house in Burlingame, CA?
There are many reasons why you needs to upgrade the pipes of your home.
For houses with galvanized piping:
Galvanized piping are located in homes built through the 1970s. A galvanized pipe is an iron water pipe which is zinc coated for corrosion protection. The fact is that the zinc coating slowly and gradually deteriorates over time exposing the iron, then corrosion buildup.
Usual Slab Leak Characteristics:
Very Low Water Pressure – The reason why could be the restriction of the water flow brought on by rust and corrosion buildup inside of the galvanized water pipe.
Rust Color Water – Rust usually finds it’s way to the fixtures. This means that a highly developed stage of corrosion in the piping.
Leaky Pipes – Leaks are most frequently resulting from corrosion of the galvanized iron pipes. Undetectable leaking can develop inside the walls, in your attic as well as underneath the home, building up the danger of major damage to the house.
For houses with polybutylene water pipe:
This type of plastic water line was used in the middle of the 70’s to early 90’s. It was reportedly the next great improvement for water pipes and fittings. Polybutylene water line systems had been installed in millions of buildings before it was discovered to be highly flawed. Almost 50% of most family homes built during this time frame is still equipped with this variety of water pipe in the home.
Polybutylene water pipes have an exceedingly small life span, considering that harsh chemicals in common city-provided water causes it to turn hard and change into brittle. The fittings quite often burst first, and afterwards the water line itself.
Polybutylene pipes consist of flexible plastic pipe, colored grey when for indoor use and black or blue for outdoor usage. Quite a few fittings were created with both metal and plastic. Insert fittings are used to join up pieces of polybutylene pipe.
For homes with copper plumbing located in the slab.
Slab leaks originate from copper or some other piping becoming corroded from certain water and soil conditions under the floor of the house.
Slab Leak Symptoms:
- Water leaking through the foundation.
- Water is running even when the faucets are turned off.
- Your water meter indicates water running despite the fact that the water is off.
- Abnormally high monthly water bills.
- Nearby neighbors have already experienced a leaking slab.
- You have experienced a slab leak before.
Reasons to like Copper Repiping
- Significant water pressure
- You can eliminate rust color or stinky water
- Nice and clean, clear water
- Having the ability to turn on several faucets at the same time
- High quality plumbing without having any more leaking pipes.
- No scalding skin in your shower if somebody turns on your faucet or flushes.
- Increased confidence since your piping system is secure and safe.
- Measurable selling point for the property.
When you hire a plumbing company or other business to perform the job, it’s likely going to cost more in the long run when you consider that you are going to have to retain the services of a drywall repair provider to replacement patch over the many repair points. When you seek the services of a repipe company that has a master patcher on staff such as Repipe Specialists, you’ll never have to spend additional money or time in getting your house back to original condition. From beginning to end, the PEX and Copper repiping process requires only two or three days.