Copper Repiping and Slab Leak Repairs in Pleasant Hill, CA

A repipe is the process where your existing water pipes in your house or a building are replaced with brand new ones. All water line fittings, supply lines and water valves are exchanged. this generally produces stronger water pressure and more favorable water quality.

Should I Repipe our house in Pleasant Hill?

There are many reasons why a person may need to replace the pipes in your house.

For residences with galvanized water line:

Galvanized piping can be found in homes constructed in the 1970’s. A galvanized pipe is an iron pipe which is coated with zinc to be protected from corrosion. Nevertheless the zinc coating eventually corrodes over the years exposing the iron, then corrosion build-up.

General Slab Leak Signs:

Decreased Water Pressure – The key reason why could possibly be the restriction in the water flow caused by corrosion and rust build-up inside the galvanized water line.

Rust Color Water – Rust typically goes into the water fixtures. This means a highly developed stage of deterioration in the pipes.

Leaking Water Pipes – Leaks are most frequently the result of corrosion of the galvanized iron pipes. Concealed leaking may develop within the walls, inside of the attic as well as under the house, generating the chances of severe damage to the house and property.

For property with polybutylene water pipes:

This form of plastic water pipe was used widely in the mid 70’s to the mid 90’s. At the time it was thought of as the next great advancement for water lines and water fixtures. Polybutylene plumbing systems were installed in millions of places of residence before it was discovered to be highly flawed. Basically 60% of homes constructed in this time period continues to have this type of water pipe in the home.

Polybutylene water pipes have a very short life span, since compounds in everyday city water makes it solidify and change into brittle. The fittings typically start leaking first, followed by the water line itself.

Polybutylene water lines are made up of flexible plastic pipe, gray when used inside and blue or black outside. Many fittings were created with plastic and metal. Insert fittings are used to join pieces of polybutylene pipe.

For homes with copper plumbing located in the slab.

Slab leaks develop from copper or other pipes becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through your foundation.
  • Water sounds like it is running even when no faucets are on.
  • Your water meter displays water running when your water is shut off.
  • Extraordinarily excessive water costs.
  • Nearby neighbors have had a leaking slab.
  • You have experienced a previous slab leak.

Reasons to like Copper or PEX Repiping

  • More significant water pressure
  • You can forget about rust colored or foul tasting water
  • Sparkling clean, clear water
  • Having the ability to turn on several faucets at the same time
  • Extremely high quality plumbing without having any more leaking water lines.
  • No scalding from the shower if someone else turns on a faucet or flushes.
  • Greater confidence when your piping system is secure.
  • Very good selling point for the property.

When you employ a local plumber or other provider to get the job done, it’s most likely going to cost you more over time when you consider that you are going to have to hire a drywall repair service company to patch over the many entry points. Any time you retain the services of a repipe business with a master patcher on staff such as Repipe Specialists, you’ll never be required to invest extra money or time in getting your home back to normal. From start to finish, the PEX and Copper repipe procedure usually takes only 2 or 3 days.