Foster City Copper Repiping and Slab Leak Repairs

A repipe is a process where the outdated water lines in a home or a building are replaced with new ones. All water line fittings, supply lines and water valves are changed. this typically ends up in far better water pressure and even better water quality.

Should We Repipe the house in Foster City?

There are many reasons why a person needs to upgrade the pipes of your house.

For residences with galvanized water lines:

Galvanized piping can be found in homes constructed in the 1970’s. A galvanized pipe is an iron water pipe which is coated with zinc to be protected from corrosion. Often times though the zinc coating progressively wears away over time revealing the iron, accompanied by corrosion buildup.

Prevailing Slab Leak Signs:

Decreased Water Pressure – The reason why may be the reduction of the water flow because of corrosion and rust buildup in the galvanized water pipe.

Rusty Water – Oxidation frequently finds it’s way to the water fixtures. This indicates a high level stage of oxidation in the plumbing.

Leaking Pipes – Leaks are the result of corrosion of the galvanized pipes. Unknown leaking can develop inside the walls, inside the attic or beneath the home, generating the chances of considerable damage to the house and property.

For homes with polybutylene plumbing:

This sort of plastic water line was traditionally used from the mid 70’s to the early 90’s. It was thought to be the next great advance for water pipes and fittings. Polybutylene water systems had already been installed in millions of buildings prior to being listed as highly flawed. Close to 75% of all properties built in this time frame continues to have this type of water pipe in the house.

Polybutylene water pipes have a very brief lifespan, considering that chemical compounds in normal city water causes it to harden and develop into brittle. The fittings ordinarily burst first, and afterwards the water line itself.

Polybutylene pipes consist of flexible plastic piping, grey when used inside and blue or black outside. Various fittings were created with metal and plastic. Insert fittings are used to join sections of polybutylene pipe.

For homes with copper plumbing located in the slab.

Slab leaks originate from copper or some other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through your foundation.
  • Water sounds like it is running even when the faucets are off.
  • Your water meter shows water running despite the fact that the water is turned off.
  • Uncommonly substantial water bills.
  • Next door neighbors already have had a leaking slab.
  • You experienced a slab leak before.

Best things about a Repipe

  • Much better water pressure
  • No rusty or bad tasting water
  • Clean, clear water
  • Having the capacity to turn on more than one faucet at the same time
  • High quality water pipes without any more leaking pipes.
  • No scalding in the shower when someone turns on the faucet or flushes.
  • Greater assurance since your piping system is secure.
  • Encouraging selling point for the property.

When you employ a plumbing service or other business to get the job done, it’s quite possibly going to cost you more over time when you consider that you will have to retain the services of a drywall repair service business to replacement patch over the many entry points. Any time you hire a repipe company with a master patcher on staff such as Repipe Specialists, you’ll never have to pay out extra money or time in getting your household back to normal. From beginning to end, the PEX and Copper repipe system will take only 2 or 3 days.