Lakewood, CA PEX Repiping and Slab Leak Repair Cost

A repipe is a process where the old piping in your house or a building are replaced with brand new ones. All water pipe fittings, stop valves and supply lines are replaced. this usually produces stronger water pressure and greater water quality.

Should We Repipe our house in Lakewood, CA?

There are many reasons for why you may want to replace the pipes of your house.

For residences with galvanized water lines:

Galvanized piping are located in houses constructed during the 1970s. A galvanized pipe is an iron water pipe which is zinc coated for corrosion protection. Regrettably the zinc coating regularly deteriorates over the years revealing the iron material, together with oxidation build-up.

General Slab Leak Signs:

Reduced Water Pressure – The reason why might be the reduction in the water flow attributable to corrosion and rust buildup in the galvanized water pipe.

Rust Color Water – Rust usually finds it’s way into the water fixtures. This indicates a high level stage of oxidation in the water pipes.

Leaky Water Pipes – Leaks are most frequently brought on by corrosion of the galvanized pipes. Unseen leaking can develop in the walls, inside of the attic and beneath the house, creating the chances of serious damage to your property.

For residences with polybutylene water lines:

This form of plastic water pipe was regularly used from the mid 70’s to early 90’s. At the time it was accepted as the next great advance for water pipes and fixtures. Polybutylene plumbing systems had already been installed in millions of buildings before it was discovered to be highly faulty. Almost 50% of all of the houses constructed in this stretch of time is still equipped with this kind of water pipe in the home.

Polybutylene pipes have an extremely limited lifespan, because chemical contaminants in common city water causes it to harden and become brittle. The fittings typically burst first, and afterwards the water line itself.

Polybutylene pipes are made up of flexible plastic piping, colored grey when used inside and black or blue outside. Quite a few fittings are manufactured with metal and plastic. Insert fittings are used to join sections of polybutylene pipe.

For houses with copper plumbing based in the slab.

Slab leaks originate from copper or any other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water is leaking through your foundation.
  • Water is running even when the faucets are turned off.
  • Water meter shows the water is running whether or not your water is off.
  • Abnormally substantial monthly water charges.
  • Others who live nearby already have experienced a leaking slab.
  • You have had a slab leak before.

Good things about Copper or PEX Repiping

  • Improved water pressure
  • No rusty or smelly water
  • Clean, clear water
  • Having the capability to use several faucets at once
  • High quality plumbing with no more leaking pipes.
  • No burnt skin from the shower when someone turns on a faucet or flushes.
  • Greater comfort when your piping system is secure and safe.
  • Very good feature for your property.

If you hire a plumbing technician or other organization to perform the job, it’s perhaps going to cost you more in the long run if you consider that you’ll have to retain the services of a drywall repair service business to patch over the numerous entry points. As soon as you employ the service of a repipe business with a master patcher on staff such as Repipe Specialists, you will never be required to invest more money or time in getting the house back to normal. From beginning to end, the PEX and Copper repipe procedure normally takes merely a couple of days.