Moraga Copper-PEX Repipe and Slab Leak Repairs

A repipe is a process where your existing water pipes in a home or a building are replaced with brand new ones. All water line fittings, stop valves and supply lines are substituted. this normally produces considerably better water pressure and more favorable water quality.

Should We Repipe our home in Moraga, CA?

There are many reasons for why you might need to replace the pipes of the home.

For households with galvanized plumbing:

Galvanized water pipes can be found in homes constructed during the 1980’s. A galvanized pipe is an iron pipe which is zinc coated for corrosion protection. Nevertheless the zinc coating gradually deteriorates over the years revealing the iron material, then corrosion buildup.

Standard Slab Leak Issues:

Lower Water Pressure – The reason could be the limitation in the water flow because of corrosion and rust buildup inside of the galvanized pipe.

Rusty Water – Corrosion generally finds it’s way into the fixtures. This suggests an advanced stage of rust in the pipes.

Leaking Water Pipes – Leaks are most commonly resulting from corrosion of the galvanized iron pipes. Concealed leaking can develop inside of the walls, inside of the attic and underneath the residence, building up the chances of serious damage to your house.

For homes with polybutylene water lines:

This kind of plastic water line was frequently used from the middle of the 70’s to the mid 90’s. At the time it was thought to be the next great improvement for water pipes and water fixtures. Polybutylene water systems were installed in millions of households prior to being listed as highly substandard. Nearly 65% of houses constructed in this period of time is still equipped with this category of water pipe in the home.

Polybutylene water pipes have an exceptionally short lifespan, because nasty chemicals in standard city water makes it turn hard and become brittle. The fittings normally burst first, and afterwards the water line itself.

Polybutylene plumbing systems consist of flexible plastic pipe, colored grey when for indoor use and blue or black for outdoor usage. Quite a few fittings are manufactured with both metal and plastic. Insert fittings are then used to join sections of polybutylene pipe.

For homes with copper plumbing located in the slab.

Slab leaks are caused by copper or any other pipes becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through the foundation.
  • Water sounds like it is running even when the faucets are turned off.
  • Your water meter displays your water is running regardless of whether your water is shut off.
  • Uncommonly higher monthly water utility bills.
  • Others who live nearby have experienced a leaking slab.
  • You have experienced a previous slab leak.

Primary advantages of Copper Repiping

  • Higher water pressure
  • You can eliminate rusty or smelly water
  • Really clean, crystal-clear water
  • Having the ability to turn on several faucets at a time
  • Superior quality water pipes with no more leaky water lines.
  • No scalding in the shower if somebody turns on the faucet or flushes.
  • Better reassurance when your piping system is dependable.
  • Encouraging selling feature for your property.

If you hire a plumbing company or other firm to perform the job, it’s very likely going to set you back more in the long term if you consider that you’ll have to hire a drywall repair service provider to patch over the numerous entry points. As soon as you employ the service of a repipe business that features a master patcher on staff such as Repipe Specialists, you’ll never have to spend more money or time in getting your home back to original condition. From beginning to end, the PEX and Copper repiping process usually takes merely a couple of days.