PEX Repiping and Slab Leak Costs in Folsom
A repipe is a process where the old piping in a home or a building are replaced with new ones. All water line fittings, supply lines and water valves are exchanged. this generally makes for considerably better water pressure and greater water quality.
Should I Repipe the house in Folsom, CA?
There are many reasons why you might need to replace the water lines of your home.
For houses with galvanized water lines:
Galvanized water pipes can be found in houses built through the 1970s. A galvanized pipe is an iron water pipe which is zinc coated to be protected from corrosion. Typically the zinc coating regularly wears away over the years exposing the iron material, followed by oxidation build-up.
Popular Slab Leak Evidence:
Very Low Water Pressure – The reason why could possibly be the reduction in the water flow as a consequence of corrosion and rust build-up inside of the galvanized pipe.
Rusty Water – Corrosion normally finds it’s way into the water fixtures. This means an advanced stage of deterioration in the pipes.
Leaky Water Pipes – Leaks are commonly the result of corrosion of the galvanized pipes. Undetectable leaking may develop within the walls, inside of the attic as well as under the house, building up the probability of serious damage to the house.
For residences with polybutylene water pipes:
This type of plastic water line was very popular in the mid 70’s to early 90’s. At the time it had been viewed as the next plumbing technology improvement for water lines and water fixtures. Polybutylene water systems had already been installed in millions of residences prior to being discovered to be highly flawed. Practically 50% of all of the family homes constructed during this time frame still has this variety of water pipe in the house.
Polybutylene water pipes have an enormously limited lifespan, considering the fact that chemicals in ordinary city water causes it to solidify and turn into brittle. The fittings often burst first, and afterwards the pipe itself.
Polybutylene pipes are made up of flexible plastic piping, grey when used inside and blue or black outside. Several fittings are made with metal and plastic. Insert fittings are used to join up sections of polybutylene pipe.
For houses with copper plumbing found in the slab.
Slab leaks originate from copper or some other pipes becoming corroded from certain soil and water conditions under the floor of the house.
Slab Leak Symptoms:
- Water leaking through your foundation.
- Water sounds like it is running even when the faucets are off.
- Your water meter indicates your water is running even though the water is shut off.
- Very increased water charges.
- Neighbors have experienced a slab leak.
- You have experienced a slab leak before.
Conveniences of Copper Repiping
- Considerably increased water pressure
- You can forget rusty or smelly water
- Nice and clean, crystal-clear water
- Having the capability to use more than one faucet at a time
- Higher quality plumbing with no more leaking water lines.
- No scalding while in the shower if somebody turns on a faucet or flushes.
- Increased satisfaction when your piping system is protected.
- Advantageous selling point for the property.
When you hire a plumbing technician or other company to perform the job, it’s probably going to cost more over time if you consider that you’ll have to hire a drywall repair company to patch over the various repair points. Whenever you employ the service of a repipe business which includes a master patcher on staff such as Repipe Specialists, you’ll never have to spend additional money or valuable time in getting the home back to original condition. From start to finish, the PEX and Copper repiping procedure will take just 2 or 3 days.