Repiping and Slab Leak Costs in Santa Ana, CA

A Copper or PEX Repipe is a treatment where the existing water lines in a house or a building are replaced with brand new ones. All pipe fittings, supply lines and water valves are substituted. this normally produces even better water pressure and greater quality water.

Should We Repipe the house in Santa Ana, CA?

There are many reasons for why you may want to upgrade the piping in your house.

For properties with galvanized plumbing:

Galvanized piping can be found in homes constructed through the 1980’s. A galvanized pipe is an iron pipe which is zinc coated to be protected from corrosion. Often times though the zinc coating steadily corrodes over the years exposing the iron material, then corrosion build-up.

General Slab Leak Symptoms:

Lower Water Pressure – The key reason why could possibly be the limitation in the water flow brought on by corrosion and rust build-up inside of the galvanized water line.

Rust Color Water – Oxidation often goes into the fixtures. This means that a highly developed stage of rust in your piping.

Leaky Pipes – Leaks are commonly brought on by corrosion of the galvanized iron pipes. Unknown leaking may develop inside of the walls, inside the attic or under the residence, building up the chances of major damage to the house and property.

For buildings with polybutylene water lines:

This type of plastic water pipe was frequently used from the mid 70’s to early 90’s. At the time it had been regarded as being the next plumbing technology improvement for plumbing and fixtures. Polybutylene water pipe systems ended up being installed in millions of houses before it was judged as highly flawed. Nearly 60% of homes constructed during this timeframe is still equipped with this form of water pipe in the home.

Polybutylene water pipes have an extremely short lifespan, because chemical contaminants in ordinary city-provided water causes it to turn hard and become brittle. The fittings frequently start leaking first, and afterwards the water pipe itself.

Polybutylene pipes consist of flexible plastic piping, grey when for indoor use and black or blue outside. Several fittings are made with both metal and plastic. Insert fittings are then used to join sections of polybutylene pipe.

For homes with copper plumbing situated in the slab.

Slab leaks originate from copper or other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water is leaking through the foundation.
  • Water is running even when no faucets are on.
  • Water meter indicates your water is running regardless of whether the water is turned off.
  • Unusually large monthly water utility bills.
  • Others who live nearby have already had a slab leak.
  • You experienced a slab leak before.

Reasons to like a Repipe

  • Substantial water pressure
  • Get rid of rusty or smelly water
  • Sparkling clean, crystal clear water
  • Being able to turn on several faucets at a time
  • Extremely high quality plumbing with no more leaking water lines.
  • No scalding skin in the shower if someone else turns on a faucet or flushes.
  • More satisfaction because your piping system is secure and safe.
  • Very good feature for the property.

When you employ a plumbing service or other business to complete the task, it’s likely going to cost you more in the long term if you consider that you are going to have to hire a drywall repair service company to replacement patch over the numerous repair points. As soon as you employ a repipe company that features a master patcher on staff such as Repipe Specialists, you will never have to pay out additional money or time in getting your home back to original condition. From beginning to end, the PEX and Copper repipe procedure takes only 2 or 3 days.