South Pasadena, CA Repiping and Slab Leak Repairs

A repipe is a treatment where the outdated water lines in your house or a building are replaced with brand new ones. All water pipe fittings, supply lines and water valves are changed out. this normally results in greater water pressure and a great deal better water quality.

Should I Repipe the house in South Pasadena, CA?

There are many reasons why a person may need to upgrade the pipes in your house.

For properties with galvanized plumbing:

Galvanized plumbing are located in houses built in the 80’s. A galvanized pipe is an iron water pipe which is coated with zinc for corrosion protection. Regretably the zinc coating slowly and gradually corrodes over the years revealing the iron material, along with corrosion build-up.

Typical Slab Leak Conditions:

Reduced Water Pressure – The particular reason why could possibly be the limitation of the water flow as a result of rust and corrosion build-up in the galvanized water pipe.

Rust Colored Water – Corrosion frequently finds it’s way to the water fixtures. This means that a highly developed stage of rust in the water pipes.

Leaking Water Pipes – Leaks are commonly brought on by corrosion of the galvanized iron pipes. Unseen leaks may develop within the walls, in your attic and under the house, creating the danger of major damage to your house.

For dwellings with polybutylene pipes:

This particular plastic water pipe was very popular from the mid 70’s to the early 90’s. It had been perceived as the next great plumbing improvement for pipes and water fixtures. Polybutylene water pipe systems had already been installed in millions of homes before it was determined to be highly faulty. Roughly 50% of all of the properties built during this period of time is still equipped with this category of pipe in the house.

Polybutylene pipes have an enormously short lifespan, since compounds in normal city water causes it to firm up and turn into brittle. The fittings normally burst open first, and afterwards the pipe itself.

Polybutylene pipes are made up of flexible plastic pipe, colored grey when used inside and black or blue for outdoor usage. Various fittings are manufactured with plastic and metal. Insert fittings are used to join up pieces of polybutylene pipe.

For houses with copper plumbing situated in the slab.

Slab leaks develop from copper or other pipes becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through your foundation.
  • Water sounds like it is running even when the faucets are turned off.
  • Water meter indicates water running despite the fact that your water is off.
  • Extraordinarily large water costs.
  • Others who live nearby have already had a leaking slab.
  • You experienced a slab leak before.

Rewards of Copper Repiping

  • Increased water pressure
  • You can eliminate rust color or bad tasting water
  • Nice and clean, clear water
  • Being able to turn on several faucets at the same time
  • High quality plumbing with no more leaking pipes.
  • No scalding from the shower when someone turns on a faucet or flushes.
  • Better comfort because your piping system is secure.
  • Effective selling point for your property.

When you hire a plumbing company or other business to complete the task, it’s quite possibly going to cost you more in the long run if you consider that you are going to have to employ a drywall repair service company to replacement patch over the many entry points. When you retain the services of a repipe company that features a master patcher on staff such as Repipe Specialists, you will never have to spend more money or valuable time in getting your home back to normal. From beginning to end, the PEX and Copper repipe process usually takes just two or three days.