Westlake Village PEX-Copper Repiping and Slab Leak Repairs

A PEX or Copper repipe is a treatment where the old piping in your home or a building are upgraded with brand new ones. All water line fittings, stop valves and supply lines are upgraded. this generally produces a lot better water pressure and a great deal better quality water.

Should We Repipe the house in Westlake Village, CA?

There are many reasons for why a person might need to replace the water pipes of the home.

For homes with galvanized piping:

Galvanized water pipes are located in houses built during the 80s. A galvanized pipe is an iron pipe which is zinc coated for corrosion protection. The sad thing is the zinc coating steadily wears away over time revealing the iron material, along with oxidation buildup.

Common Slab Leak Signs:

Low Water Pressure – The reason could possibly be the restriction in the water flow attributed to corrosion and rust build-up in the galvanized water line.

Rust Colored Water – Oxidation typically finds it’s way to the fixtures. This means a highly developed stage of deterioration in your pipes.

Leaking Pipes – Leaks are commonly brought on by corrosion of the galvanized iron pipes. Hidden leaks can develop inside of the walls, inside the attic and under the house, creating the potential for extensive damage to the home and property.

For buildings with polybutylene water lines:

This particular plastic water line was widely used from the mid 70’s to early 90’s. It had been considered to be the next great plumbing advancement for water lines and water fixtures. Polybutylene water systems were installed in millions of people’s homes prior to being determined to be highly flawed. Basically 65% of all family homes constructed during this period of time is still equipped with this kind of pipe in the home.

Polybutylene pipes have an exceedingly brief lifespan, because chemicals in common city water causes it to turn hard and develop into brittle. The fittings usually burst first, followed by the water line itself.

Polybutylene water lines are made up of flexible plastic pipe, gray when for indoor use and blue or black outside. Many fittings are manufactured with plastic and metal. Insert fittings are then used to join up pieces of polybutylene pipe.

For homes with copper plumbing situated in the slab.

Slab leaks are generated by copper or any other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water is leaking through the foundation.
  • Water is running even when the faucets are off.
  • Water meter indicates the water is running when the water is off.
  • Uncommonly higher water utility bills.
  • Next door neighbors have already experienced a leaking slab.
  • You experienced a slab leak before.

Important things about Copper Repiping

  • Heightened water pressure
  • You can eliminate rust color or foul tasting water
  • Nice and clean, crystal-clear water
  • Having the capability to turn on more than one faucet simultaneously
  • Higher quality plumbing without having any more leaking water lines.
  • No burnt skin while in the shower when someone turns on the faucet or flushes.
  • More peace of mind since your piping system is secure and safe.
  • Measurable selling point for the property.

When you hire a local plumber or other organization to do the job, it’s possibly going to cost more in the long term when you consider that you are going to have to employ a drywall repair service company to replacement patch over the many entry points. Any time you employ the service of a repipe company which includes a master patcher on staff such as Repipe Specialists, you’ll never be required to pay out extra money or time getting your household back to normal. From start to finish, the PEX and Copper repiping system takes only two or three days.